Seam-It

Availability: In stock. Order by 3pm for next day delivery.

Available exclusively in the UK from Stonegate, Seam-It Stone Adhesive by SCIGRIP is the ultimate product for seaming and edging granite, quartz and other engineered stone surfaces. Approved by Cosentino for use on DEKTON & TheSize for Neolith and available in over 50 colours the Seam-it range is the ideal choice as it gives superior strength and an even, consistent cure as well as being easy to apply with our Twin Tube Sealant Gun (Stock No. 50.138.01).

We offer the full 50+ colour range from Seam-It, though only keep stock of those on this page. If you're looking for a colour you don't see here, use the link below to choose the best colour to match your surface and get in touch with us; we will do our utmost to make sure your Seam-It is with you as soon as possible. 

     

                                                  Stonegate_Seam_It_Colour_Range 

Grouped product items
Code Product Colour Size Qty £
36.138.00 Seam-It Crystal Clear 250ml
0 £21.40
36.138.02 Seam-It Glacier White 250ml
0 £21.40
36.138.06 Seam-It Satin Black 250ml
0 £21.40
36.138.07 Seam-It White 250ml
0 £21.40
36.138.08 Seam-It Perfect White 250ml
0 £21.40
36.138.09 Seam-It Storm Grey 250ml
0 £21.40
36.138.10 Seam-It Cygnus Pearl 250ml
0 £21.40
36.138.11 Seam-It Mocha 250ml
0 £21.40
36.138.12 Seam-It Oyster 250ml
0 £21.40
36.138.13 Seam-It Earth 250ml
0 £21.40
36.138.14 Seam-It Galaxy Black 250ml
0 £21.40
36.138.15 Seam-It Flint 250ml
0 £21.40
36.138.16 Seam-It White Linen 250ml
0 £21.40
36.138.95 Seam-It Nozzle -
0 £0.90
Compare Selected
Total £0.00
Fabricators Tip

Remember! Seam-It's shelf life and cure speed are both affected by temperature! Storing your Seam-It Adhesive correctly is the key to getting the most out it. The Seam-It range will last for more than 2 years if you keep your glue at or below 22°C.

Order by 3:00pm for next day delivery

Available exclusively in the UK from Stonegate, Seam-It stone adhesive by SCIGRIP is the ultimate product for seaming and edging granite, quartz and other engineered stone surfaces. Approved by Cosentino for use on DEKTON & TheSize for Neolith and available in over 50 colours the Seam-it range is the ideal choice as it gives superior strength and an even, consistent cure as well as being easy to apply with our Twin Tube Sealant Gun (Stock No. 50.138.01).

 

Getting The Most From Your Seam-It Adhesive

  

Storage:  Store in a cool, dry place with a temperature between 10-20°C. Don't use the product if it has been exposed to high temperatures for a long period of time and ensure to keep it stored standing upright. Use your Seam-It within 2 years (24 months) of its manufacture. You can store the product with the mixing nozzle attached but ensure the outlet hole is thoroughly cleaned before attaching a new nozzle. 

Mixing Nozzles:  In order for the product to work effectively, the two cartridges are mixed together when pushed through the nozzle. It's only recommended you use the official nozzles provided with the product and available on this page, they have been specially engineered to be used with Seam-It. Ensure that your mixing nozzles are clean, free of blockages and undamaged. If the Seam-It material has started to gel in-between uses, discard and replace. 

Dispensing Guns:  We would only recommend that you apply Seam-It with our Twin Tube Sealant Gun (Stock No. 50.138.01). This gun benefits from getting the exact amount of pressure needed to effectively dispense and mix at the required ratio. To get the most from your application, use light pressure on the gun's trigger and never force the material out of the cartridge. 

Cold Glue:  If your glue has gotten colder than the recommended 10°C, it's important to bring it back up to room temperature before using it. In order to trigger the chemical reaction needed for the glue to harden, the material needs to be at the right temperature. A cold glue may also be too thick to pass through the mixing nozzle, further affecting the overall finished product. 

  

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

Seam-It is a two-part, Methacrylate adhesive for joining & seaming solid stone surfaces and is the latest generation of colour-matched adhesives for the stone industry. Dozens of pre-mixed colours are available to match with any stone surface on the market. 

 

Benefits of using Seam-It:

 

-  Exceptional environmental resistance to water, impact, scuffing, UV light & high-temperatures

- Approved and recommended by Cosentino, TheSize & Caesarstone for their specialist materials 

- Colour-matching available to all your slabs

- Improved bond strength over competitor products; next generation adhesive technology

More Information
Brand Seam-It
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

We found other products you might like!