When you have been in the trade for a long time you tend to pick up the lingo. With this in mind, we have developed a fun test for the seasoned professionals or a fantastic cheat sheet for anyone new to the trade.

  stone fabrication- stone polishing - stonegate

 

The 30 Terms

 

Look at the 30 terms/techniques below, can you describe what they mean? Have a go and then scroll down for the answers.

 

Leathered Texture

Riverwash Texture

Apature

Core Holes

Blind Holes

Fluting

Underside Polish

Mitre down panel

Rebate Hob

Flush-Fit Hob

Pop Up Socket

UCS

Natural Quartzite

Birds Beak Joint

Birds Beak Edge

Countertop

Undermount Sink

Surface Mount Sink

Arris

Chamfer

Honed Finish

Antique Finish

Bush Hammer

Flamed Finish

PPE

The Matrix

Edge Profile

Recessed Drainer

Ream

Conditioning

  

  

  

 

  stone fabrication - stone lifting - stonegate

  

 

  

  

 

 

The Answers

 

Leathered Texture - A leathered surface isn’t glossy and has little to no shine, It is a rustic tactile look common on kitchen countertops.  Leathered stone has a textured, pebbly surface with little pits and fissures — sort of like the surface of a fine piece of leather. Leathered granite hides fingerprints, water spots and smudges well.

 

Riverwash Texture – Riverwash is a relatively new style of finish, it’s a  unique texture that creates a beautiful 3D effect. The texture is quite similar to that of an orange peel and is popular on black granite.

 

Aperture – An aperture is a hole or opening in which light can travel through.

 

Core Holes -  The holes that have been made with a core drill. Core holes are often used in sink installation to help cut out the sink or for tap holes.

 

Blind Holes – These are similar to a core drill with the exception that they leave no core, this is often used if you are drilling a hole as a recess instead of going all the way through.

 

Fluting – These are shallow grooves that run along a surface. Commonly used on kitchen countertops with fluting wheels to create the draining board.

 

Underside Polish – This is exactly how it sounds, the polishing underneath the worktop, This will commonly occur when the worktop overhangs as the underneath can be seen and felt. 

 

Mitre down panel – This is often used to make the stone appear thicker. It will involve joining an edge underneath the kitchen worktop to give the appearance the stone is thicker than it is. The more popular waterfall kitchen island is another bigger example of a mitre down panel.

 

Flush Fit Hob – This is a hob that sits level with the stone, this look is achieved by cutting a rebate for the hob. (see below)

 

Rebate Hob – After the hole for the hob is cut out a rebate is cut around the hole for the hob to rest on. This allows for a flush fit hob installation, which allows the hob to fit level with the stone.

 

Pop Up Socket – These are made using a core drill. The socket is made to pop up out the stone. This is often seen in minimalist kitchens

 

UCS – Ultra-compact surfaces. i.e DEKTON or Neolith

 

Natural Quartzite – Unlike quartz, quartzite is a naturally occurring metamorphic rock. It is created when sandstone is subjected to extreme heat and pressure caused by tectonic plate compression in the crust of the earth.

 

Birds Beak Joint – A Bird Beak Joint is another name for a ‘V Joint’. It will comprise of 2 stone slabs joined together with a sloped edge, forming a V. It looks like a birds beak, hence the term.

 

Birds Beak Edge – The edge effect made with the bird's beak joint

 

Countertop – A countertop or worktop is a horizontal work surface often found in kitchens, bathrooms or workrooms.

 

Undermount sink – An Undermount sink is a sink installation where the sink sits underneath the stone countertop. This type of installation allows beautiful displays allowing you to really show off your edging and polishing skills.

 

Surface mount Sink –  A surface mount sink tends to sit on top of the stone.

 

Arris – An arris is a smaller chamfer (see below) eg 2 – 3 mm.

 

Chamfer – a slopped edge often at 45-degree or 60-degree angles. It can be achieved with an edging profile such as the E

 

Honed – The Honed finish is a dull matt finish on a kitchen countertop. This is a popular choice of finish commonly found on limestone and slate. A Honed Finish is created using abrasives like texturizing brushes and will provide a smooth matt finish without the visible groove.

 

Antique – The Antiqued finish replicates a distressed look over time. This gives countertops an aged appearance.

 

Bush Hammer – This is a rougher finish than the leathered effect. The finish can be achieved with a bush hammer.

 

Flamed – The flamed finish will produce a rough texture to the stone but with eye-catching sparkling granules.

 

PPE – This stands for Personal Protection Equipment. This is equipment worn by the worker to protect themselves from hazards in the workplace. It can include items such as dust masks, gloves and eye protection.

 

The Matrix – The matrix is part of the blade composition. The Matrix is the metal bond which holds the diamonds in place 

 

Edge Profile – An Edge profile refers to the shape on the edge of the countertop made with a profiling tool. Common edge profiles include Z, Ogee, Dupont and Sharknose.

 

Recessed Drainer – This is when a recess is cut around the sink, using a recess wheel,  for the water to drain to. This helps ensure the water does not run over the edge of the countertop.

 

Ream – This is the process of making a hole bigger. After coring out a hole you would use a reaming router to enlarge it to the desired size.

 

Conditioning – This is a pre-polish. You would need to condition the stone before using an edge polishing system if the stone was particularly distressed with scratches. This is done with a conditioning pad.

 

  

 

 

So how did you do? Did you get 30/30, or do you need to brush up on your terminology a bit more. Test you colleagues and see who can get the highest score in your workshop.

 

  

 

Stonegate Precision Tooling, the UK's most trusted supplier...

Here at Stonegate Precision Tooling, we've had the privilege of working with stone fabricators across both the UK and worldwide in providing them with the most innovative tooling and consumables for stone. Our work with stone fabricators has given us the first-hand expertise our customers need when choosing a key supplier to provide them with the essentials to keep them in business.

Through aiming for 100% customer satisfaction we exceed in honesty, loyalty and integrity whilst ensuring that our high-quality, performance products are available whenever our customers need them - 98% of our customers receive their orders on the next day; on time, in full. We work hard with all our customers to provide a service that ensures our customers experience value in all that we do and it's this commitment that has enabled Stonegate to become the UK's most trusted provider of specialist products and knowledge to stone fabricators.

EXPLORE THE DIAMOND STONE CUTTING RANGE HERE

      

Further reading on the Stonegate Tooling Blog: