ITALDIAMANT BLADE

Availability: In stock. Order by 3pm for next day delivery.

Made in Italy, the Ital Diamant blade features very hard diamond set inside a soft bond for the cutting of ultra compact surfaces. Producing a fast, clean cut it's the perfect choice for UCS and accredited by the manufacturers of DEKTON & Neolith for added peace of mind when cutting these materials. Remember that you will need a high volume of water when cutting all ultra-compact surfaces with this blade to ensure blade life and product quality. This is the bridge saw of choice for cutting specialist stones but don’t forget to keep the blade in it’s most efficient condition by sharpening after each cut with our accredited sharpening block, stock number 50.60.200. 

 

View the technical parameters for this blade in the information section below

Grouped product items
Code Diameter Segments Qty £
01.179.35 350mm 31
0 £280.00
01.179.40 400mm 33
0 £334.00
Compare Selected
Total £0.00
Fabricators Tip

Don't forget! It's recommended that if you're cutting DEKTON & Neolith you keep this Bridge Saw Blade at optimal cutting performance with our Accredited Sharpening Block. It's the best way to ensure neat, chip-free cutting when using this blade on very dense materials. You can find the block at the bottom of this page...

Order by 3:00pm for next day delivery

Stonegate Diamond Bridge Saw Blade Technical Parameters - Italdiamant Diamond Bridge Saw Blade For Ultra-Compact Surfaces

...Helping you get the most from your tools!

 

Water

It's essential that the blade receives the right quantity of water when cutting to refresh and clean the segments. 

 

Italdiamant Blade Technical Parameters

    

Use our blade RPM matrix below to work out the recommended speed for our signature EVO 3 diamond blade. Simply match your blade diameter and material to the RPM we would recommend for your job:

   

DEKTON Technical Parameters

  

Material Colour Blade Diameter Slab Thickness RPM Running Speed
Dark / Colourful 350mm 8 - 12 - 20 - 30mm 1,900 - 2,500 1M / minute
White / Light Colours 350mm 8 - 12 - 20 - 30mm 1,900 - 2,500 0.5M / minute
Dark / Colourful 400mm 8 - 12 - 20 - 30mm 1,700 - 2,300 1M / minute
White / Light Colours 450mm 8 - 12 - 20 - 30mm 1,700 - 2,300 0.5M / minute

 

 LAPITEC Technical Parameters

 

Blade Diameter Slab Thickness RPM Running Speed

350mm

12mm

1,900 - 2,500

1.5M / minute
20mm 1M / minute
30mm 0.5M / minute

400mm

12mm

1,700 - 2,300

1.5M / minute
20mm 1M / minute
30mm 0.5M / minute

 

NEOLITH Technical Parameters

 

Blade Diameter Slab Thickness RPM Running Speed
350mm 3 - 6 - 12mm 1,900 - 2,500 1.5M / minute
350mm 20mm 1,900 - 2,500 1M / minute
400mm 3 - 6 - 12mm 1,700 - 2,300 1.5M / minute
400mm 20mm 1,700 - 2,300 1M / minute

 

LAMINAM Technical Parameters

 

Blade Diameter Slab Thickness RPM Running Speed
350mm 3 - 3+ - 5 - 7 - 3+3 - 5+3 - 12+ 1,900 - 2,500 1M / minute
400mm 3 - 3+ - 5 - 7 - 3+3 - 5+3 - 12+ 1,700 - 2,300 1M / minute


More Information
Brand Cherokee
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account