400mm Italdiamant NEXT Blade c/w B&D Peg Holes
The ‘Italdiamant Next Blade’ is the next generation blade for cutting every material known to worktop fabricators!
With unprecedented speeds on all materials and no need to change the saw blade between material changes this really is the industry answer to the challenges fabricators face with time constraints.
The average time spent changing saw blades is around 15-20mins depending on the saw.
Finding it difficult to cut ceramic and porcelain almost at speeds you cut engineered stone? Then here’s your answer!
This blade is far ahead of other blades on the market with virtually chip free finish on the most difficult materials.
This blade also requires very little sharpening. It is suggested to cut an engineered stone job periodically between a Dekton job to freshen up the diamonds.
Also beware, this blade is extremely fast!
Natural Marble 30mm Speed = 2.5m/Min
Natural Granite 30mm Speed = 3.5m/Min
General Ceramic & Porcelain Speed = 2.5-3m/Min
Dekton 20mm Speed = Dark Colours 2-2.4m/Min & Light Colours 1.5-1.7m/Min
Engineered Stone 30mm Speed 4m/Min
Please note that outside influences, for example amount of water or CNC machine in use, can have an impact on recommended speeds.
SEE IT IN ACTION! https://youtu.be/ABbLnt1oGo4
|Feed Rate/Min on 20mm
|Feed Rate/Min on 30mm
In stock. Order by 4pm for next day delivery.
|RPM 2800 - 3000
|Feed Rate/Min on 20mm 2000mm
|Feed Rate/Min on 30mm 2500mm
|Segment Height 10mm
|Location Holes Breton & Donatoni