Abrasive Polish Flute Tips
Abrasive Polish Flute Tips for finishing drain grooves on a CNC after the initial metal positions.
Initially purchase a holder to hold the tip then the tips can be purchased individually ongoing.
Make sure setting up is very accurate as these tips are delicate
you can offset the Z Angle on the CNC to something off 90 degrees this will help with the lifetime of these tips too.
12mm Shank and 12mm Tip with a Radius 6mm
Come in 400Grit and 1000Grit for final polish
Feed Rates 300mm/ Min
Removal 0.3mm 400 Grit
Removal 0.2mm 1000 Grit
Tip Holder £80 each
Tips £84 each
Please contact the team on 01482 620400 to purchase
|Abrasive Polish Flute Tips||
Place on Back order – Stock is due in soon